Published at Friday, September 21st 2018. by Anika Beitz in Stair.
Finished interior stairs are perhaps the toughest challenge that a wood worker will face and are often the exclusive domain of the "stair specialist". This is particularly true with the more complicated systems such as circular stairs. However, when it comes to straight runs, adjustable bracket systems greatly simplify the process. Using adjustable bracket systems allow a person with only basic skills to build a well finished interior stair with a high degree of accuracy and elegance.
Proper stair design has a maximum rise of eight inches, a minimum run of nine inches and a minimum tread width of 9.25 inches. A safe and properly configured stairway should be at 34 inches wide. As a rule the wider steps are safer then narrow stairs. There needs to be adequate headroom above the set of stairs. The required headroom is at least 6 foot 6 inches. When there is a door at the top of a set of steps, it should open away from the stairs for safety reasons. If a door opens toward the stairs a landing is needed so a person opening the door will not be able to push someone on the stairs.
Selecting a stair-lift has now become very easy with the Internet. There are the websites of different manufacturers where not only the product types are shown, but also the features of each of the products are shown so that the costs can be compared relative to the features that each of the products has to offer. In this way, you can easily decide in favour of one of the stair lifts that offer similar features. The Electra-Ride by Bruno stair-lift is an accessibility product that is similar to ThyssenKrupp’s Stair-Glide in certain aspects. The former has all controls, automatic, and is compact and unique in design. The seat height is adjustable so that the seating is comfortable. With its compact design, it is ensured that other people would be able to easily use the stairs even when the stair lift is fixed.
Stairs parts are usually defined into two: the steps and the railing system. These two parts are highly connected to one another and should always complement each other to ensure its safety and design. If one part is not of good quality, the over-all look of the stairs and inevitable the house will be destroyed. If the railing is too low or too high, this can endanger the people who are living in that house especially children who likes to play in the stairway. On the other hand, if the steps are unequal and are not functional, this will also be a danger to all who uses the stairs.
The stair is now laid on its back and (starting from the bottom step) the treads are laid in position, fitting perfectly without gaps. As each tread is positioned it is attached to the rear riser. Once all treads are positioned, the stair is laid on its side again and the end screws through the brackets are inserted. The fasteners attaching the tread to the top of the rise may be inserted as blind screws (using pocket holes in the risers) or blocks from the underside or simply using finished nails from the top.
Any content, trademark’s, or other material that might be found on the heartlandanimalhospital.us website that is not heartlandanimalhospital.us’s property remains the copyright of its respective owner/s. In no way does heartlandanimalhospital.us claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.
Copyright © 2018 heartlandanimalhospital.us. All Rights Reserved.