Published at Wednesday, September 26th 2018. by Maya Ehrenstein in Stair.
ThyssenKrupp’s Stair-Glide has advanced features, the most significant of which is the hand pendant control; fold up arms and the foot obstruction sensors. In addition to these features, the stair lift also has over speed brake and a joystick control on the arm, which makes the control easier even for people who are not able to use their hands properly. Stairs are composed of stringers, stair treads and stair risers. The stringers are the slanted members on the sides of the stairs which sit on the floor and are tightly attached at the top of the staircase. In most stair construction, there are two stringers installed on each set of steps. The stair treads are the sections in which you step on to travel up and down the stairs. Stair treads are usually made of wood.
The first stringer can be laid on the floor using blocks and one end of each riser is attached to each bracket so that the risers are in a vertical position in relation to the stringer. The risers are attached to each bracket using blind screws through the holes in the brackets. The second stringer is then positioned over the opposite ends of the risers and attached. A clamp may be used to pull the stringers tight against the riser ends. This one step will eliminate up to 80% of the custom fitting normally required for conventional stairs.
Adjustable brackets are designed to be user friendly, fast, accurate and above all, strong. In fact, the brackets do most of the work. They automatically adjust to the exact rise and run and are approved as "adjustable joist hangers". This allows the risers to act like floor joists, carrying the load across the stair between the stringers which means only two stringers are required for stairs up to nine feet in width. Additionally, each stringer requires only three to four end cuts (only six to eight cuts per stair!)....significantly eliminating dozens of saw tooth cuts which are often required for conventional stringers.
Stair lifts are devices that are attached to the treads of staircases to safely move someone who is elderly or disabled up or down the stairs. They consist of a track, usually made of aluminum, a chair attached to the track, and the electronic controls that make the chair move up or down the track. Stair lifts are powered by alternating current (AC), which is hooked up to the household electrical system, or with direct current (DC), which uses a battery that recharges from the household electrical system, and does not require use of home electricity to work properly.
There are many innovations being made in the field of accessibility equipment and new features are being added on a continuous basis to the new products to further facilitate the users of the equipment and to ensure their safety as well. The manufacturer that you choose for getting the stair lift depends on the kind of features you want your stair lift to have and the kind of accessibility options you’re looking for. Some of the most well known models of star lifts in the market are the Electra-Ride Elite, Citia, Stair-Glide, Excel and the Electra-Ride III. Bruno is one of the best manufacturers not only in curved stair lifts but also for straight ones. Another one of the best manufacturers of straight stair lifts is Savaria Concord as well ThyssenKrupp.
Any content, trademark’s, or other material that might be found on the heartlandanimalhospital.us website that is not heartlandanimalhospital.us’s property remains the copyright of its respective owner/s. In no way does heartlandanimalhospital.us claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.
Copyright © 2018 heartlandanimalhospital.us. All Rights Reserved.