Published at Friday, 14 September 2018. Stair. By Elise Luthi.
Starting with two parallel 2x6 stringer members, the adjustable brackets are first positioned using a spacing tool and then attached to each member with a single "pivot screw". For finished interior stairs, the stringers may be "paint" grade or "stain" grade but will have a tongue and grove or spline milled into the parallel mating surfaces so that once the brackets are adjusted, the mating surfaces will be pushed together to form a continuous, decorative, one piece knee wall stringer. The remaining screws are inserted and the end cuts are made. All the risers and treads are now square cut to the exact length using a chop saw. It is recommended that a stop is used for accuracy and efficiency. The treads are usually cut slightly shorter than the risers (1/64") for fit. For fast assembly it’s best to first pre- assemble the stair and then lift into position whenever circumstances permit.
There are many innovations being made in the field of accessibility equipment and new features are being added on a continuous basis to the new products to further facilitate the users of the equipment and to ensure their safety as well. The manufacturer that you choose for getting the stair lift depends on the kind of features you want your stair lift to have and the kind of accessibility options you’re looking for. Some of the most well known models of star lifts in the market are the Electra-Ride Elite, Citia, Stair-Glide, Excel and the Electra-Ride III. Bruno is one of the best manufacturers not only in curved stair lifts but also for straight ones. Another one of the best manufacturers of straight stair lifts is Savaria Concord as well ThyssenKrupp.
The stair is now laid on its back and (starting from the bottom step) the treads are laid in position, fitting perfectly without gaps. As each tread is positioned it is attached to the rear riser. Once all treads are positioned, the stair is laid on its side again and the end screws through the brackets are inserted. The fasteners attaching the tread to the top of the rise may be inserted as blind screws (using pocket holes in the risers) or blocks from the underside or simply using finished nails from the top.
Any content, trademark’s, or other material that might be found on the heartlandanimalhospital.us website that is not heartlandanimalhospital.us’s property remains the copyright of its respective owner/s. In no way does heartlandanimalhospital.us claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.
Copyright © 2018 heartlandanimalhospital.us. All Rights Reserved.