Published at Friday, 14 September 2018. Stair. By Florentine Brugmann.
In fact, the best time to add a stair lift system may be before it is actually a requirement. There are plenty of seniors who may not be disabled, but who experience intermittent conditions, such as an arthritic knee or hip, that make climbing stairs a challenge some of the time. Stair lifts can be installed in straight or curved staircases. Most models today run on rechargeable DC battery packs that hold a charge for around 8 to 10 trips up and down, depending on the length of the track and the weight of the person it is transporting. Some of these battery packs have chargers mounted next to the top or bottom of the lift track, while others are able to recharge from anywhere along the track. DC powered stair lifts are the preferred style today because they still work (for a while anyway) if the AC power to the household is cut. Many seniors, through no fault of their own, lose the ability to go up and down staircases with agility. And many of them have strong emotional ties to the house in which they live. A stair lift can make the difference between allowing a senior to have significant independence of daily living and having to making the difficult choice of selling a beloved home.
There are many innovations being made in the field of accessibility equipment and new features are being added on a continuous basis to the new products to further facilitate the users of the equipment and to ensure their safety as well. The manufacturer that you choose for getting the stair lift depends on the kind of features you want your stair lift to have and the kind of accessibility options you’re looking for. Some of the most well known models of star lifts in the market are the Electra-Ride Elite, Citia, Stair-Glide, Excel and the Electra-Ride III. Bruno is one of the best manufacturers not only in curved stair lifts but also for straight ones. Another one of the best manufacturers of straight stair lifts is Savaria Concord as well ThyssenKrupp.
Starting with two parallel 2x6 stringer members, the adjustable brackets are first positioned using a spacing tool and then attached to each member with a single "pivot screw". For finished interior stairs, the stringers may be "paint" grade or "stain" grade but will have a tongue and grove or spline milled into the parallel mating surfaces so that once the brackets are adjusted, the mating surfaces will be pushed together to form a continuous, decorative, one piece knee wall stringer. The remaining screws are inserted and the end cuts are made. All the risers and treads are now square cut to the exact length using a chop saw. It is recommended that a stop is used for accuracy and efficiency. The treads are usually cut slightly shorter than the risers (1/64") for fit. For fast assembly it’s best to first pre- assemble the stair and then lift into position whenever circumstances permit.
Any content, trademark’s, or other material that might be found on the heartlandanimalhospital.us website that is not heartlandanimalhospital.us’s property remains the copyright of its respective owner/s. In no way does heartlandanimalhospital.us claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.
Copyright © 2018 heartlandanimalhospital.us. All Rights Reserved.