Published at Friday, 14 September 2018. Stair. By Florentine Brugmann.
But to keep yourself active and to fulfill your needs you need to move up and down the stairs. The first option to move up and down the stairs is to use a stair lift. But most of the time, these costs so much that many cannot afford them. This is when the stair lift rental comes into being. It is a great alternative to buying one. It either uses electricity to run or is battery operated. It uses heavy materials like aluminum and steel and hence is a secured product. Other than this there a quite a lot of stair lift rental products that are available in the market. The main difference between them is the way they work and the facilities that they offer. Methods which are used by the stair lift rental to transport a person up the stairs are screw method or the rack and pinion method, cable method, and chain method.
Starting with two parallel 2x6 stringer members, the adjustable brackets are first positioned using a spacing tool and then attached to each member with a single "pivot screw". For finished interior stairs, the stringers may be "paint" grade or "stain" grade but will have a tongue and grove or spline milled into the parallel mating surfaces so that once the brackets are adjusted, the mating surfaces will be pushed together to form a continuous, decorative, one piece knee wall stringer. The remaining screws are inserted and the end cuts are made. All the risers and treads are now square cut to the exact length using a chop saw. It is recommended that a stop is used for accuracy and efficiency. The treads are usually cut slightly shorter than the risers (1/64") for fit. For fast assembly it’s best to first pre- assemble the stair and then lift into position whenever circumstances permit.
The stair is now laid on its back and (starting from the bottom step) the treads are laid in position, fitting perfectly without gaps. As each tread is positioned it is attached to the rear riser. Once all treads are positioned, the stair is laid on its side again and the end screws through the brackets are inserted. The fasteners attaching the tread to the top of the rise may be inserted as blind screws (using pocket holes in the risers) or blocks from the underside or simply using finished nails from the top.
Any content, trademark’s, or other material that might be found on the heartlandanimalhospital.us website that is not heartlandanimalhospital.us’s property remains the copyright of its respective owner/s. In no way does heartlandanimalhospital.us claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.
Copyright © 2018 heartlandanimalhospital.us. All Rights Reserved.