Published at Thursday, 13 September 2018. Stair. By Elise Luthi.
A stair lift is not only something that has a lot of significance for the concerned people, but is also a major investment. This is the reason that makes it important that a stair lift has to be just right and adequate to the needs as well as safe. If you are the one for quality, then two manufacturers are there who are famous for their best quality. One is Stannah and the other is Bruno. Stannah is a UK manufacturer while the latter is a US manufacturer of stair lifts. The manufacturers and models for the straight and curved stair-lifts differ and there are different companies that have established a great name in their respective kinds of stair lifts. For the curved stair lift, ThyssenKrupp Access and Bruno manufacture the most popular and top quality models. ThyssenKrupp Access offers the model Stair Glide and Flow II in curved stair lifts and Bruno makes the curved stair lift, which is the Electra-Ride III.
Battery packs come as a sealed unit that is maintenance free. Eventually, however, it will lose its ability to hold a charge and need to be replaced. the battery packs attach to the stair lift or are externally mounted near the charge station. It is a good idea to check the cost of batteries when choosing a stair lift, because they will have to be replaced eventually. Stair lift technology has moved away from the use of household AC power to use of rechargeable DC battery packs. While the batteries recharge on the household current, the lift does not require the household current in order to work, allowing use of the lift during power outages and resulting in a much smoother and quieter ride.
Starting with two parallel 2x6 stringer members, the adjustable brackets are first positioned using a spacing tool and then attached to each member with a single "pivot screw". For finished interior stairs, the stringers may be "paint" grade or "stain" grade but will have a tongue and grove or spline milled into the parallel mating surfaces so that once the brackets are adjusted, the mating surfaces will be pushed together to form a continuous, decorative, one piece knee wall stringer. The remaining screws are inserted and the end cuts are made. All the risers and treads are now square cut to the exact length using a chop saw. It is recommended that a stop is used for accuracy and efficiency. The treads are usually cut slightly shorter than the risers (1/64") for fit. For fast assembly it’s best to first pre- assemble the stair and then lift into position whenever circumstances permit.
Any content, trademark’s, or other material that might be found on the heartlandanimalhospital.us website that is not heartlandanimalhospital.us’s property remains the copyright of its respective owner/s. In no way does heartlandanimalhospital.us claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.
Copyright © 2018 heartlandanimalhospital.us. All Rights Reserved.